• Centre for Energy Sciences (CES)
  • energy@um.edu.my
logo
logo
Menu

Publication 2023

  • Home
  • Publication 2023

Publication 2023

  1. Abdullah, S., Zubir, M. N. B., Bin Muhamad, M. R., Newaz, K. M. S., Öztop, H. F., Alam, M. S., & Shaikh, K. (2023). Technological development of evaporative cooling systems and its integration with air dehumidification processes: A review. Energy and Buildings, 283, Article 112805. https://doi.org/10.1016/j.enbuild.2023.112805 
  2. Abdullah, S., Zubir, M. N. B., Muhamad, M. R. B., Newaz, K. M. S., Öztop, H. F., Yu, L. J., Alam, M. S., & Shaikh, K. (2024). Synthesis, Characterization and Permeance Evaluation of Nanofiller-Enhanced Polyvinyl Alcohol/Potassium Formate-Based Membranes. Journal of Polymers and the Environment, 32(5), 2299-2312. https://doi.org/10.1007/s10924-023-03111-6 
  3. Ganesan, P., Zaib, F., Zaharinie, T., Mobedi, M., & Gnanasekaran, N. (2023). Thermal resistance of Open-Cell metal foam with thermal interface materials (TIM). Applied Thermal Engineering, 218, Article 119336. https://doi.org/10.1016/j.applthermaleng.2022.119336 
  4. Goh, Y. S., Haseeb, A., Basirun, W. J., Wong, Y. H., Sabri, M. F. M., & Low, B. Y. (2023). Effects of Concentration of Adipic Acid on the Electrochemical Migration of Tin for Printed Circuit Board Assembly. Journal of Electronic Materials, 52(3), 2236-2249. https://doi.org/10.1007/s11664-022-10155-2 
  5. Gul, M., Zulkifli, N. W. M., Masjuki, H. H., Kalam, M. A., Mujtaba, M. A., Harith, M. H., Syahir, A. Z., Ahmed, W., & Farooq, A. B. (2023). Effect of TMP-based-cottonseed oil-biolubricant blends on tribological behavior of cylinder liner-piston ring combinations(vol 278, 118242, 2020). Fuel, 331, Article 125742. https://doi.org/10.1016/j.fuel.2022.125742 
  6. Imran, S., Gul, M., Kalam, M. A., Zulkifli, N. W. M., Mujtaba, M. A., Yusoff, M., & Awang, M. S. N. (2023). Effect of various nanoparticle biodiesel blends on thermal efficiency and exhaust pollutants. International Journal of Energy and Environmental Engineering, 14(4), 937-948. https://doi.org/10.1007/s40095-023-00557-1 
  7. Lee, E. L., Goh, Y. S., Haseeb, A., Wong, Y. H., Sabri, M. F. M., & Low, B. Y. (2023). Review-Electrochemical Migration in Electronic Materials: Factors Affecting the Mechanism and Recent Strategies for Inhibition. Journal of the Electrochemical Society, 170(2), Article 021505. https://doi.org/10.1149/1945-7111/acb61a 
  8. Liu, Y. Q., Chong, W. T., Yau, Y. H., Qin, M. Y., Deng, F., Wang, X. Y., & Pan, S. (2023). A new algorithm for real-time detection of window opening area in residential buildings. Building and Environment, 244, Article 110817. https://doi.org/10.1016/j.buildenv.2023.110817 
  9. Mazumder, S., Metselaar, H. S. C., Sukiman, N. L., & Zulkifli, N. W. M. (2023). Friction and wear behavior of fluoride added Si3N4-SiC ceramic composites at elevated temperature. Ceramics International, 49(8), 12787-12795. https://doi.org/10.1016/j.ceramint.2022.12.144 
  10. Mazumder, S., Metselaar, H. S. C., Sukiman, N. L., & Zulkifli, N. W. M. (2023). Influence of fluoride phase on the tribological behaviour of Si3N4-SiC composites under extreme operating conditions. Wear, 528-529, Article 204970. https://doi.org/10.1016/j.wear.2023.204970 
  11. Sabran, N. S., Fadzallah, I. A., Sabri, M. F. M., & Ono, T. (2023). Thermoelectric properties of Indium doped skutterudite thick film synthesized by a facile technique of electrochemical deposition. Journal of Materiomics, 9(5), 899-909. https://doi.org/10.1016/j.jmat.2023.02.013 
  12. Shaikh, K., Kazi, S. N., Zubir, M. N. M., Abd Razak, B., Wong, K., Wong, Y. H., Khan, W. A., Abdullah, S., & Alam, M. S. (2023). Investigation of zirconium (Zr) coated heat exchanger surface for the enhancement of heat transfer and retardation of mineral fouling. Journal of the Taiwan Institute of Chemical Engineers, 153, Article 105246. https://doi.org/10.1016/j.jtice.2023.105246 
  13. Shaikh, K., Kazi, S. N., Zubir, M. N. M., Wong, K., Yusoff, S., Khan, W. A., Alam, M. S., Abdullah, S., & Shukri, M. H. B. (2023). Mitigation of CaCO3 fouling on heat exchanger surface using green functionalized carbon nanotubes (GFCNT) coating. Thermal Science and Engineering Progress, 42, Article 101878. https://doi.org/10.1016/j.tsep.2023.101878 
  14. Shaikh, K., Kazi, S. N., Zubir, M. N. M., Wong, K. H., Khan, W. A., Abdullah, S., Alam, M. S., & Keat, S. B. (2023). Retardation of CaCO3 fouling on heat exchanger surface using water-based cloves-functionalized multiwall carbon nanotubes (C-MWCNT) nanofluids. Journal of Thermal Analysis and Calorimetry, 148(22), 12937-12946. https://doi.org/10.1007/s10973-023-12551-0 
  15. Shaikh, K., Newaz, K. M. S., Zubir, M. N. M., Wong, K. H., Khan, W. A., Abdullah, S., Alam, M. S., & Sugumaran, L. (2023). A review of recent advancements in the crystallization fouling of heat exchangers. Journal of Thermal Analysis and Calorimetry, 148(22), 12369-12392. https://doi.org/10.1007/s10973-023-12544-z 
  16. Shatar, N. M., Sabri, M. F. M., Salleh, M. F. M., & Ani, M. H. (2023). Energy, exergy, economic, environmental analysis for solar still using partially coated condensing cover with thermoelectric cover cooling. Journal of Cleaner Production, 387, Article 135833. https://doi.org/10.1016/j.jclepro.2022.135833 
  17. Shatar, N. M., Sabri, M. F. M., Salleh, M. F. M., & Ani, M. H. (2023). Investigation on the performance of solar still with thermoelectric cooling system for various cover material. Renewable Energy, 202, 844-854. https://doi.org/10.1016/j.renene.2022.11.105 
  18. Shatar, N. M., Sabri, M. F. M., Salleh, M. F. M., Ani, M. H., Xie, X. T., & Weck, A. (2023). Femtosecond laser induced porous surface on polymethyl methacrylate for filmwise condensation to improve solar still productivity. Desalination, 568, Article 116997. https://doi.org/10.1016/j.desal.2023.116997 
  19. Su, G. C., Zulkifli, N. W. M., Liu, L., Ong, H. C., Ibrahim, S., Yu, K. L., Wei, Y. F., & Bin, F. (2023). Carbon-negative co-production of methanol and activated carbon from bagasse pyrolysis, physical activation, chemical looping, and methanol synthesis. Energy Conversion and Management, 293, Article 117481. https://doi.org/10.1016/j.enconman.2023.117481 
  20. Su, G. C., Zulkifli, N. W. M., Ong, H. C., Ibrahim, S., Cheah, M. Y., Zhu, R. A., & Bu, Q. (2023). Co-pyrolysis of medical protective clothing and oil palm wastes for biofuel: Experimental, techno-economic, and environmental analyses. Energy, 273, Article 127221. https://doi.org/10.1016/j.energy.2023.127221 

Last Update: 22/07/2025