• Centre for Energy Sciences (CES)
  • energy@um.edu.my
logo
logo
Menu

Publication 2016

  • Home
  • Publication 2016

Publication 2016

Articles

  1. Aamir, M., Kalwar, K. A., & Mekhilef, S. (2016). Review: Uninterruptible Power Supply (UPS) system. Renewable & Sustainable Energy Reviews, 58, 1395-1410. doi:10.1016/j.rser.2015.12.335
     
  2. Abedin, M. J., Imran, A., Masjuki, H. H., Kalam, M. A., Shahir, S. A., Varman, M., & Ruhul, A. M. (2016). An overview on comparative engine performance and emission characteristics of different techniques involved in diesel engine as dual-fuel engine operation. Renewable & Sustainable Energy Reviews, 60, 306-316. doi:10.1016/j.rser.2016.01.118
     
  3. Abedin, M. J., Kalam, M. A., Masjuki, H. H., Sabri, M. F. M., Rahman, S. M. A., Sanjid, A., & Fattah, I. M. R. (2016). Production of biodiesel from a non-edible source and study of its combustion, and emission characteristics: A comparative study with B5. Renewable Energy, 88, 20-29. doi:10.1016/j.renene.2015.11.027
     
  4. Aditiya, H. B., Chong, W. T., Mahlia, T. M. I., Sebayang, A. H., Berawi, M. A., & Nur, H. (2016). Second generation bioethanol potential from selected Malaysia's biodiversity biomasses: A review. Waste Management, 47, 46-61. doi:10.1016/j.wasman.2015.07.031
     
  5. Aditiya, H. B., Mahlia, T. M. I., Chong, W. T., Nur, H., & Sebayang, A. H. (2016). Second generation bioethanol production: A critical review. Renewable & Sustainable Energy Reviews, 66, 631-653. doi:10.1016/j.rser.2016.07.015
     
  6. Ahmad, S., Albatsh, F. M., Mekhilef, S., & Mokhlis, H. (2016). Optimal Placement of Unified Power Flow Controller by Dynamic Implementation of System-Variable-Based Voltage-Stability Indices to Enhance Voltage Stability. Journal of Testing and Evaluation, 44(1), 290-309. doi:10.1520/jte20140512
     
  7. Ahmed, A., Masjuki, H. H., Varman, M., Kalam, M. A., Habibullah, M., & Al Mahmud, K. A. H. (2016). An overview of geometrical parameters of surface texturing for piston/cylinder assembly and mechanical seals. Meccanica, 51(1), 9-23. doi:10.1007/s11012-015-0180-6
     
  8. Akter, M. P., Mekhilef, S., Tan, N. M. L., & Akagi, H. (2016). Modified Model Predictive Control of a Bidirectional AC-DC Converter Based on Lyapunov Function for Energy Storage Systems. Ieee Transactions on Industrial Electronics, 63(2), 704-715. doi:10.1109/tie.2015.2478752
     
  9. Ali, O. M., Mamat, R., Masjuki, H. H., & Abdullah, A. A. (2016). Analysis of blended fuel properties and cycle-to-cycle variation in a diesel engine with a diethyl ether additive. Energy Conversion and Management, 108, 511-519. doi:10.1016/j.enconman.2015.11.035
     
  10. Al-Sehemi, A. G., Al-Assiri, M. S., Kalam, A., Zafar, Q., Azmer, M. I., Sulaiman, K., & Ahmad, Z. (2016). Sensing performance optimization by tuning surface morphology of organic (D-pi-A) dye based humidity sensor. Sensors and Actuators B-Chemical, 231, 30-37. doi:10.1016/j.snb.2016.03.004
     
  11. Amir, Z., Jan, B. M., Wahab, A. K. A., Khalil, M., Ali, B. S., & Chong, W. T. (2016). Viscosity prediction model optimization for Saraline-based super lightweight completion fluid at high pressure and temperature. Petroleum Exploration and Development, 43(5), 863-868. doi:10.1016/s1876-3804(16)30103-3
     
  12. Amiri, A., Ahmadi, G., Shanbedi, M., Etemadi, M., Zubir, M. N. M., Chew, B. T., & Kazi, S. N. (2016). Heat transfer enhancement of water-based highly crumpled few-layer graphene nanofluids. Rsc Advances, 6(107), 105508-105527. doi:10.1039/c6ra22365f
     
  13. Amiri, A., Arzani, H. K., Kazi, S. N., Chew, B. T., & Badarudin, A. (2016). Backward-facing step heat transfer of the turbulent regime for functionalized graphene nanoplatelets based water-ethylene glycol nanofluids. International Journal of Heat and Mass Transfer, 97, 538-546. doi:10.1016/j.ijheatmasstransfer.2016.02.042
     
  14. Amiri, A., Shanbedi, M., Ahmadi, G., Eshghi, H., Kazi, S. N., Chew, B. T., . . . Zubir, M. N. M. (2016). Mass production of highly-porous graphene for high-performance supercapacitors. Scientific Reports, 6. doi:10.1038/srep32686
     
  15. Amiri, A., Shanbedi, M., Chew, B. T., Kazi, S. N., & Solangi, K. H. (2016). Toward improved engine performance with crumpled nitrogen-doped graphene based water-ethylene glycol coolant. Chemical Engineering Journal, 289, 583-595. doi:10.1016/j.cej.2015.12.083
     
  16. Amrane, F., Chaiba, A., Babes, B. E., & Mekhilef, S. (2016). DESIGN AND IMPLEMENTATION OF HIGH PERFORMANCE FIELD ORIENTED CONTROL FOR GRID-CONNECTED DOUBLY FED INDUCTION GENERATOR VIA HYSTERESIS ROTOR CURRENT CONTROLLER. Revue Roumaine Des Sciences Techniques-Serie Electrotechnique Et Energetique, 61(4), 319-324.
     
  17. Amrane, F., Chaiba, A., & Mekhilef, S. (2016). High performances of Grid-connected DFIG based on Direct Power Control with Fixed Switching Frequency via MPPT Strategy using MRAC and Neuro-Fuzzy Control. Journal of Power Technologies, 96(1), 27-39.
     
  18. Arslan, A., Masjuki, H. H., Kalam, M. A., Varman, M., Mufti, R. A., Mosarof, M. H., . . . Quazi, M. M. (2016). Surface Texture Manufacturing Techniques and Tribological Effect of Surface Texturing on Cutting Tool Performance: A Review. Critical Reviews in Solid State and Materials Sciences, 41(6), 447-481. doi:10.1080/10408436.2016.1186597
     
  19. Arslan, A., Masjuki, H. H., Varman, M., Abul Kalam, M., Quazi, M. M., & Mosarof, M. H. (2016). Effect of change in temperature on the tribological performance of micro surface textured DLC coating. Journal of Materials Research, 31(13), 1837-1847. doi:10.1557/jmr.2016.12
     
  20. Arzani, H. K., Amiri, A., Arzani, H. K., Bin Rozali, S., Kazi, S. N., & Badarudin, A. (2016). Toward improved heat transfer performance of annular heat exchangers with water/ethylene glycol-based nanofluids containing graphene nanoplatelets. Journal of Thermal Analysis and Calorimetry, 126(3), 1427-1436. doi:10.1007/s10973-016-5663-8
     
  21. Arzani, H. K., Amiri, A., Kazi, S. N., Badarudin, A., & Chew, B. T. (2016). Heat transfer performance of water-based tetrahydrofurfuryl polyethylene glycol-treated graphene nanoplatelet nanofluids. Rsc Advances, 6(70), 65654-65669. doi:10.1039/c6ra13301k
     
  22. Arzani, H. K., Amiri, A., Kazi, S. N., Chew, B. T., & Badarudin, A. (2016). Experimental investigation of thermophysical properties and heat transfer rate of covalently functionalized MWCNT in an annular heat exchanger. International Communications in Heat and Mass Transfer, 75, 67-77. doi:10.1016/j.icheatmasstransfer.2016.03.015
     
  23. Ashraful, A. M., Masjuki, H. H., Kalam, M. A., Rashedul, H. K., Habibullah, M., Rashed, M. M., . . . Arslan, A. (2016). Impact of edible and non-edible biodiesel fuel properties and engine operation condition on the performance and emission characteristics of unmodified DI diesel engine. Biofuels-Uk, 7(3), 219-232. doi:10.1080/17597269.2015.1132365
     
  24. Azeem, Badruddin, I. A., Idris, M. Y. I., Nik-Ghazali, N., Ahmed, N. J. S., & Al-Rashed, A. (2016). Conjugate heat and mass transfer in square porous cavity. Indian Journal of Pure & Applied Physics, 54(12), 777-786.
     
  25. Azman, S. S. N., Zulkifli, N. W. M., Masjuki, H., Gulzar, M., & Zahid, R. (2016). Study of tribological properties of lubricating oil blend added with graphene nanoplatelets. Journal of Materials Research, 31(13), 1932-1938. doi:10.1557/jmr.2016.24
     
  26. Bashir, M. N., Haseeb, A., Rahman, A., & Fazal, M. A. (2016). Effect of Cobalt Doping on the Microstructure and Tensile Properties of Lead Free Solder Joint Subjected to Electromigration. Journal of Materials Science & Technology, 32(11), 1129-1136. doi:10.1016/j.jmst.2016.09.007
     
  27. Bensana, T., & Mekhilef, S. (2016). Numerical and experimental analysis of vibratory signals for rolling bearing fault diagnosis. Mechanika(3), 217-224. doi:10.5755/j01.mech.22.3.11962
     
  28. Bhatti, J., Fazal, M. A., Bushroa, A. R., Khan, A. F., & Quazi, M. M. (2016). Structural and mechanical properties of (Cr, Ni) N single and gradient layer coatings deposited on mild steel by magnetron sputtering. Tribology-Materials Surfaces & Interfaces, 10(3), 117-125. doi:10.1080/17515831.2016.1204106
     
  29. Bhatti, J., Fazal, M. A., Khan, A. F., Bushroa, A. R., & Quazi, M. M. (2016). Investigation of the mechanical properties of electrodeposited nickel and magnetron sputtered chromium nitride coatings deposited on mild steel substrate. Journal of Adhesion Science and Technology, 30(20), 2224-2235. doi:10.1080/01694243.2016.1178027
     
  30. Chek, L. W., Mekhilef, S., Sulaiman, E., & Krishnamurthi, M. (2016). Design of ramp-time current control with dynamic fuzzy bandwidth for wireless power transmission. International Journal of Microwave and Wireless Technologies, 8(8), 1173-1182. doi:10.1017/s1759078715001270
     
  31. Chen, Y. C., Chen, W. H., Lin, B. J., Chang, J. S., & Ong, H. C. (2016). Impact of torrefaction on the composition, structure and reactivity of a microalga residue. Applied Energy, 181, 110-119. doi:10.1016/j.apenergy.2016.07.130 
     
  32. Chong, W. T., Al-Mamoon, A., Poh, S. C., Saw, L. H., Shamshirband, S., & Mojumder, J. C. (2016). Sensitivity analysis of heat transfer rate for smart roof design by adaptive neuro-fuzzy technique. Energy and Buildings, 124, 112-119. doi:10.1016/j.enbuild.2016.04.074
  33. Chong, W. T., Gwani, M., Shamshirband, S., Muzammil, W. K., Tan, C. J., Fazlizan, A., . . . Wong, K. H. (2016). Application of adaptive neuro-fuzzy methodology for performance investigation of a power-augmented vertical axis wind turbine. Energy, 102, 630-636. doi:10.1016/j.energy.2016.02.082
     
  34. Cojbasic, Z., Petkovic, D., Shamshirband, S., Tong, C. W., Ch, S., Jankovic, P., . . . Baralic, J. (2016). Surface roughness prediction by extreme learning machine constructed with abrasive water jet. Precision Engineering-Journal of the International Societies for Precision Engineering and Nanotechnology, 43, 86-92. doi:10.1016/j.precisioneng.2015.06.013
     
  35. Dey, P., & Mekhilef, S. (2016). Shunt hybrid active power filter under nonideal voltage based on fuzzy logic controller. International Journal of Electronics, 103(9), 1580-1592. doi:10.1080/00207217.2016.1138515
     
  36. Dharma, S., Masjuki, H. H., Ong, H. C., Sebayang, A. H., Silitonga, A. S., Kusumo, F., & Mahlia, T. M. I. (2016). Optimization of biodiesel production process for mixed Jatropha curcas-Ceiba pentandra biodiesel using response surface methodology. Energy Conversion and Management, 115, 178-190. doi:10.1016/j.enconman.2016.02.034
     
  37. Dharma, S., Ong, H. C., Sebayang, A. H., & Silitonga, A. S. (2016). An overview of engine durability and compatibility using biodiesel-bioethanol-diesel blends in compression-ignition engines. Energy Conversion and Management, 128, 66-81. doi:10.1016/j.enconman.2016.08.072
     
  38. Elsheikh, M. H., Sabri, M. F. M., Said, S. M., Miyazaki, Y., Masjuki, H. H., Shnawah, D. A., . . . Bashir, M. A. (2016). Microstructural Modification of Co4Sb12 Skutterudite Thermoelectric Material Through Al Exceed Doping. Science of Advanced Materials, 8(11), 2121-2127. doi:10.1166/sam.2016.2835
     
  39. Elsheikh, M. H., Sabri, M. F. M., Said, S. M., Miyazaki, Y., Masjuki, H. H., Shnawah, D. A. A., . . . Bashir, M. A. (2016). Thermoelectric Properties of Microstructurally Modified CoSb3 Skutterudite by Hf-Addition. Journal of Electronic Materials, 45(6), 2886-2890. doi:10.1007/s11664-016-4355-2
     
  40. Fauzi, H., Metselaar, H. S. C., Mahlia, T. M. I., Ong, H. C., Nasruddin, & Khanlou, H. M. (2016). Preparation and thermal characteristics of eutectic fatty acids/Shorea javanica composite for thermal energy storage. Applied Thermal Engineering, 100, 62-67. doi:10.1016/j.applthermaleng.2016.01.146
     
  41. Fayeka, M., Fazal, M. A., & Haseeb, A. (2016). Effect of aluminum addition on the electrochemical corrosion behavior of Sn-3Ag-0.5Cu solder alloy in 3.5 wt% NaCl solution. Journal of Materials Science-Materials in Electronics, 27(11), 12193-12200. doi:10.1007/s10854-016-5374-8
     
  42. Fazal, M. A., Sazzad, B. S., Haseeb, A., & Masjuki, H. H. (2016). Inhibition study of additives towards the corrosion of ferrous metal in palm biodiesel. Energy Conversion and Management, 122, 290-297. doi:10.1016/j.enconman.2016.05.081
     
  43. Ghatrehsamani, S., Ebrahimi, R., Kazi, S. N., Badry, A. B., & Sadeghinezhad, E. (2016). Optimization model of peach production relevant to input energies - Yield function in Chaharmahal va Bakhtiari province, Iran. Energy, 99, 315-321. doi:10.1016/j.energy.2015.07.078
     
  44. Govindaraju, K., Badruddin, I. A., Viswanathan, G. N., Kamangar, S., Ahmed, N. J. S., & Al-Rashed, A. (2016). Influence of variable bifurcation angulation and outflow boundary conditions in 3D finite element modelling of left coronary artery on coronary diagnostic parameter. Current Science, 111(2), 368-374. doi:10.18520/cs/v111/i2/368-374
     
  45. Govindaraju, K., Viswanathan, G. N., Badruddin, I. A., Kamangar, S., Ahmed, N. J. S., & Al-Rashed, A. (2016). The influence of artery wall curvature on the anatomical assessment of stenosis severity derived from fractional flow reserve: a computational fluid dynamics study. Computer Methods in Biomechanics and Biomedical Engineering, 19(14), 1541-1549. doi:10.1080/10255842.2016.1170119
     
  46. Govindaraju, K., Viswanathan, G. N., Badruddin, I. A., Kamangar, S., Ahmed, N. J. S., & Al-Rashed, A. (2016). A parametric study of the effect of arterial wall curvature on non-invasive assessment of stenosis severity: computational fluid dynamics study. Current Science, 111(3), 483-491. doi:10.18520/cs/v111/i3/483-491
     
  47. Gulzar, M., Masjuki, H. H., Kalam, M. A., Varman, M., Zulkifli, N. W. M., Mufti, R. A., & Zahid, R. (2016). Tribological performance of nanoparticles as lubricating oil additives. Journal of Nanoparticle Research, 18(8). doi:10.1007/s11051-016-3537-4
     
  48. Gulzar, M., Masjuki, H. H., Varman, M., Kalam, M. A., Zulkifli, N. W. M., Mufti, R. A., . . . ArsIan, A. (2016). Effects of biodiesel blends on lubricating oil degradation and piston assembly energy losses. Energy, 111, 713-721. doi:10.1016/j.energy.2016.05.132
     
  49. Hanif, M., Mahlia, T. M. I., Aditiya, H. B., Chong, W. T., & Nasruddin. (2016). Techno-economic and environmental assessment of bioethanol production from high starch and root yield Sri Kanji 1 cassava in Malaysia. Energy Reports, 2, 246-253. doi:10.1016/j.egyr.2016.03.004
     
  50. Hasan, M. M., Mekhilef, S., Messikh, T., & Ahmed, M. (2016). Three-phase multilevel inverter with high value of resolution per switch employing a space vector modulation control scheme. Turkish Journal of Electrical Engineering and Computer Sciences, 24(4), 1993-2009. doi:10.3906/elk-1307-201
     
  51. Hassani, S., Saidur, R., Mekhilef, S., & Taylor, R. A. (2016). Environmental and exergy benefit of nanofluid-based hybrid PV/T systems. Energy Conversion and Management, 123, 431-444. doi:10.1016/j.enconman.2016.06.061
     
  52. Hassani, S., Taylor, R. A., Mekhilef, S., & Saidur, R. (2016). A cascade nanofluid-based PV/T system with optimized optical and thermal properties. Energy, 112, 963-975. doi:10.1016/j.energy.2016.06.142
     
  53. Hurnada, A. M., Hojabri, M., Mekhilef, S., & Hamada, H. M. (2016). Solar cell parameters extraction based on single and double-diode models: A review. Renewable & Sustainable Energy Reviews, 56, 494-509. doi:10.1016/j.rser.2015.11.051
     
  54. Imdadul, H. K., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Alabdulkarem, A., Kamruzzaman, M., & Rashed, M. M. (2016). A comparative study of C-4 and C-5 alcohol treated diesel-biodiesel blends in terms of diesel engine performance and exhaust emission. Fuel, 179, 281-288. doi:10.1016/j.fuel.2016.04.003
     
  55. Imdadul, H. K., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Alabdulkarem, A., Rashed, M. M., & Ashraful, A. M. (2016). Influences of ignition improver additive on ternary (diesel-biodiesel-higher alcohol) blends thermal stability and diesel engine performance. Energy Conversion and Management, 123, 252-264. doi:10.1016/j.enconman.2016.06.040
     
  56. Imdadul, H. K., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Alabdulkarem, A., Rashed, M. M., . . . How, H. G. (2016). Higher alcohol-biodiesel-diesel blends: An approach for improving the performance, emission, and combustion of a light-duty diesel engine. Energy Conversion and Management, 111, 174-185. doi:10.1016/j.enconman.2015.12.066
     
  57. Iranmanesh, S., Mehrali, M., Sadeghinezhad, E., Ang, B. C., Ong, H. C., & Esmaeilzadeh, A. (2016). Evaluation of viscosity and thermal conductivity of graphene nanoplatelets nanofluids through a combined experimental-statistical approach using respond surface methodology method. International Communications in Heat and Mass Transfer, 79, 74-80. doi:10.1016/j.icheatmasstransfer.2016.10.004
     
  58. Islam, M., Afrin, N., & Mekhilef, S. (2016). Efficient Single Phase Transformerless Inverter for Grid-Tied PVG System With Reactive Power Control. Ieee Transactions on Sustainable Energy, 7(3), 1205-1215. doi:10.1109/tste.2016.2537365
     
  59. Islam, M., & Mekhilef, S. (2016). Efficient Transformerless MOSFET Inverter for a Grid-Tied Photovoltaic System. Ieee Transactions on Power Electronics, 31(9), 6305-6316. doi:10.1109/tpel.2015.2501022
     
  60. Islam, M. M., Hassan, M. H., Kalam, M. A., Zulkifli, N., Habibullah, M., & Hossain, M. M. (2016). Improvement of cold flow properties of Cocos nucifera and Calophyllum inophyllum biodiesel blends using polymethyl acrylate additive. Journal of Cleaner Production, 137, 322-329. doi:10.1016/j.jclepro.2016.07.080
     
  61. Islam, M. T., Abdullah, A. B., Shahir, S. A., Kalam, M. A., Masjuki, H. H., Shumon, R., & Rashid, M. H. (2016). A public survey on knowledge, awareness, attitude and willingness to pay for WEEE management: Case study in Bangladesh. Journal of Cleaner Production, 137, 728-740. doi:10.1016/j.jclepro.2016.07.111
     
  62. Izadyar, N., Ong, H. C., Chong, W. T., & Leong, K. Y. (2016). Resource assessment of the renewable energy potential for a remote area: A review. Renewable & Sustainable Energy Reviews, 62, 908-923. doi:10.1016/j.rser.2016.05.005
     
  63. Izadyar, N., Ong, H. C., Chong, W. T., Mojumder, J. C., & Leong, K. Y. (2016). Investigation of potential hybrid renewable energy at various rural areas in Malaysia. Journal of Cleaner Production, 139, 61-73. doi:10.1016/j.jclepro.2016.07.167
     
  64. Kalam, M. A., Rashed, M. M., Imdadul, H. K., & Masjuki, H. H. (2016). Property development of fatty acid methyl ester from waste coconut oil as engine fuel. Industrial Crops and Products, 87, 333-339. doi:10.1016/j.indcrop.2016.04.021
     
  65. Kalwar, K. A., Mekhilef, S., Seyedmahmoudian, M., & Horan, B. (2016). Coil Design for High Misalignment Tolerant Inductive Power Transfer System for EV Charging. Energies, 9(11). doi:10.3390/en9110937
     
  66. Khanahmadi, S., Yusof, F., Ong, H. C., Amid, A., & Shah, H. (2016). Cocoa pod husk: A new source of CLEA-lipase for preparation of low-cost biodiesel: An optimized process. Journal of Biotechnology, 231, 95-105. doi:10.1016/j.jbiotec.2016.05.015
     
  67. Khandanlou, R., Ngoh, G. C., & Chong, W. T. (2016). Feasibility Study and Structural Analysis of Cellulose Isolated from Rice Husk: Microwave Irradiation, Optimization, and Treatment Process Scheme. Bioresources, 11(3), 5751-5766. doi:10.15376/biores.11.3.5751-5766
     
  68. Khandanlou, R., Ngoh, G. C., Chong, W. T., Bayat, S., & Saki, E. (2016). Fabrication of Silver Nanoparticles Supported on Rice Straw: In Vitro Antibacterial Activity and its Heterogeneous Catalysis in the Degradation of 4-Nitrophenol. Bioresources, 11(2), 3691-3708.
     
  69. Khuong, L. S., Zulkifli, N. W. M., Masjuki, H. H., Mohamad, E. N., Arslan, A., Mosarof, M. H., & Azham, A. (2016). A review on the effect of bioethanol dilution on the properties and performance of automotive lubricants in gasoline engines. Rsc Advances, 6(71), 66847-66869. doi:10.1039/c6ra10003a
     
  70. Lan, T. H., Wang, C. T., Yang, Y. C., & Wen-Tong, C. (2016). Multi-effects of gravity and geometric flow channel on the performance of continuous microbial fuel cells. International Journal of Green Energy, 13(14), 1483-1489. doi:10.1080/15435075.2016.1206012
     
  71. Lee, H. V., Juan, J. C., Hin, T. Y. Y., & Ong, H. C. (2016). Environment-Friendly Heterogeneous Alkaline-Based Mixed Metal Oxide Catalysts for Biodiesel Production. Energies, 9(8). doi:10.3390/en9080611
  72. Lee, Y. C., Wang, C. T., Yang, Y. C., & Chong, W. T. (2016). Effects of chaotic acclimation applied on performance of microbial fuel cells. International Journal of Green Energy, 13(14), 1501-1506. doi:10.1080/15435075.2016.1212198
     
  73. Leong, K. Y., Ong, H. C., Amer, N. H., Norazrina, M. J., Risby, M. S., & Ahmad, K. Z. K. (2016). An overview on current application of nanofluids in solar thermal collector and its challenges. Renewable & Sustainable Energy Reviews, 53, 1092-1105. doi:10.1016/j.rser.2015.09.060
     
  74. Mahamudul, H., Rahman, M. M., Metselaar, H. S. C., Mekhilef, S., Shezan, S. A., Sohel, R., . . . Badiuzaman, W. N. I. (2016). Temperature Regulation of Photovoltaic Module Using Phase Change Material: A Numerical Analysis and Experimental Investigation. International Journal of Photoenergy. doi:10.1155/2016/5917028
     
  75. Mahdavifard, M. H., Sabri, M. F. M., Said, S. M., Shnawah, D. A., Badruddin, I. A., & Rozali, S. (2016). Effects of Fe and Bi Minor Alloying on Mechanical, Thermal, and Microstructural Properties of Sn-0.7Cu Solder Alloy. Journal of Electronic Materials, 45(7), 3673-3682. doi:10.1007/s11664-016-4521-6
     
  76. Masaoud, A., Ping, H. W., Mekhilef, S., & Belkamel, H. (2016). Highly efficient three-phase three-level multilevel inverter employing different commutation strategies. Turkish Journal of Electrical Engineering and Computer Sciences, 24(1), 76-87. doi:10.3906/elk-1303-88
     
  77. Masjuki, H. H., Ruhul, A. M., Mustafi, N. N., Kalam, M. A., Arbab, M. I., & Fattah, I. M. R. (2016). Study of production optimization and effect of hydroxyl gas on a CI engine performance and emission fueled with biodiesel blends. International Journal of Hydrogen Energy, 41(33), 14519-14528. doi:10.1016/j.ijhydene.2016.05.273
     
  78. Milano, J., Ong, H. C., Masjuki, H. H., Chong, W. T., Lam, M. K., Loh, P. K., & Vellayan, V. (2016). Microalgae biofuels as an alternative to fossil fuel for power generation. Renewable & Sustainable Energy Reviews, 58, 180-197. doi:10.1016/j.rser.2015.12.150
     
  79. Mohammadi, K., Khorasanizadeh, H., Shamshirband, S., & Tong, C. W. (2016). Influence of introducing various meteorological parameters to the Angstrom-Prescott model for estimation of global solar radiation. Environmental Earth Sciences, 75(3). doi:10.1007/s12665-015-4871-z
     
  80. Mojumder, J. C., Chong, W. T., Ong, H. C., Leong, K. Y., & Abdullah Al, M. (2016). An experimental investigation on performance analysis of air type photovoltaic thermal collector system integrated with cooling fins design. Energy and Buildings, 130, 272-285. doi:10.1016/j.enbuild.2016.08.040
     
  81. Mojumder, J. C., Ong, H. C., Chong, W. T., Shamshirband, S., & Abdullah Al, M. (2016). Application of support vector machine for prediction of electrical and thermal performance in PV/T system. Energy and Buildings, 111, 267-277. doi:10.1016/j.enbuild.2015.11.043
     
  82. Monirul, I. M., Masjuki, H. H., Kalam, M. A., Mosarof, M. H., Zulkifli, N. W. M., Teoh, Y. H., & How, H. G. (2016). Assessment of performance, emission and combustion characteristics of palm, jatropha and Calophyllum inophyllum biodiesel blends. Fuel, 181, 985-995. doi:10.1016/j.fuel.2016.05.010
     
  83. Mosarof, M. H., Kalam, M. A., Masjuki, H. H., Alabdulkarem, A., Ashraful, A. M., Arslan, A., . . . Monirul, I. M. (2016). Optimization of performance, emission, friction and wear characteristics of palm and Calophyllum inophyllum biodiesel blends. Energy Conversion and Management, 118, 119-134. doi:10.1016/j.enconman.2016.03.081
     
  84. Mosarof, M. H., Kalam, M. A., Masjuki, H. H., Alabdulkarem, A., Habibullah, M., Arslan, A., & Monirul, I. M. (2016). Assessment of friction and wear characteristics of Calophyllum inophyllum and palm biodiesel. Industrial Crops and Products, 83, 470-483. doi:10.1016/j.indcrop.2015.12.082
     
  85. Mosarof, M. H., Kalam, M. A., Masjuki, H. H., Arslan, A., Monirul, I. M., Ruhul, A. M., . . . Khuong, L. S. (2016). Analysis of thermal stability and lubrication characteristics of Millettia pinnata oil. Rsc Advances, 6(84), 81414-81425. doi:10.1039/c6ra13257j
     
  86. Nordiyana, M. S. W., Khalil, M., Jan, B. M., Ali, B. S., & Tong, C. W. (2016). Formation and Phase Behavior of Winsor Type III Jatropha curcas-Based Microemulsion Systems. Journal of Surfactants and Detergents, 19(4), 701-712. doi:10.1007/s11743-016-1814-y
     
  87. Norjannah, B., Ong, H. C., Masjuki, H. H., Juan, J. C., & Chong, W. T. (2016). Enzymatic transesterification for biodiesel production: a comprehensive review. Rsc Advances, 6(65), 60034-60055. doi:10.1039/c6ra08062f
     
  88. Nurfahmi, Ong, H. C., Jan, B. M., Tong, C. W., Fauzi, H., & Chen, W. H. (2016). Effects of organosolv pretreatment and acid hydrolysis on palm empty fruit bunch (PEFB) as bioethanol feedstock. Biomass & Bioenergy, 95, 78-83. doi:10.1016/j.biombioe.2016.09.008
     
  89. Oi, L. E., Choo, M. Y., Lee, H. V., Ong, H. C., Abd Hamid, S. B., & Juan, J. C. (2016). Recent advances of titanium dioxide (TiO2) for green organic synthesis. Rsc Advances, 6(110), 108741-108754. doi:10.1039/c6ra22894a
     
  90. Olatomiwa, L., Mekhilef, S., Ismail, M. S., & Moghavvemi, M. (2016). Energy management strategies in hybrid renewable energy systems: A review. Renewable & Sustainable Energy Reviews, 62, 821-835. doi:10.1016/j.rser.2016.05.040
     
  91. Olatomiwa, L., Mekhilef, S., & Ohunakin, O. S. (2016). Hybrid renewable power supply for rural health clinics (RHC) in six geo-political zones of Nigeria. Sustainable Energy Technologies and Assessments, 13, 1-12. doi:10.1016/j.seta.2015.11.001
     
  92. Oon, C. S., Ateeq, M., Shaw, A., Al-Shamma'a, A., Kazi, S. N., & Badarudin, A. (2016). Experimental study on a feasibility of using electromagnetic wave cylindrical cavity sensor to monitor the percentage of water fraction in a two phase system. Sensors and Actuators a-Physical, 245, 140-149. doi:10.1016/j.sna.2016.05.005
     
  93. Oon, C. S., Ateeq, M., Shaw, A., Wylie, S., Al-Shamma'a, A., & Kazi, S. N. (2016). Detection of the gas-liquid two-phase flow regimes using non-intrusive microwave cylindrical cavity sensor. Journal of Electromagnetic Waves and Applications, 30(17), 2241-2255. doi:10.1080/09205071.2016.1244019
     
  94. Pang, Y. L., Lim, S., Ong, H. C., & Chong, W. T. (2016). Research progress on iron oxide-based magnetic materials: Synthesis techniques and photocatalytic applications. Ceramics International, 42(1), 9-34. doi:10.1016/j.ceramint.2015.08.144
     
  95. Pang, Y. L., Lim, S., Ong, H. C., & Chong, W. T. (2016). Synthesis, characteristics and sonocatalytic activities of calcined gamma-Fe2O3 and TiO2 nanotubes/gamma-Fe2O3 magnetic catalysts in the degradation of Orange G. Ultrasonics Sonochemistry, 29, 317-327. doi:10.1016/j.ultsonch.2015.10.003
     
  96. Paria, S., Baradaran, S., Amiri, A., Sarhan, A. A. D., & Kazi, S. N. (2016). Performance evaluation of latent heat energy storage in horizontal shell-and-finned tube for solar application. Journal of Thermal Analysis and Calorimetry, 123(2), 1371-1381. doi:10.1007/s10973-015-5006-1
     
  97. Quazi, M. M., Fazal, M. A., Haseeb, A., Yusof, F., Masjuki, H. H., & Arslan, A. (2016). Effect of rare earth elements and their oxides on tribo-mechanical performance of laser claddings: A review. Journal of Rare Earths, 34(6), 549-564. doi:10.1016/s1002-0721(16)60061-3
     
  98. Quazi, M. M., Fazal, M. A., Haseeb, A., Yusof, F., Masjuki, H. H., & Arslan, A. (2016). Laser-based Surface Modifications of Aluminum and its Alloys. Critical Reviews in Solid State and Materials Sciences, 41(2), 106-131. doi:10.1080/10408436.2015.1076716
     
  99. Rahman, M. M., Mekhilef, S., Saidur, R., Billah, A., & Rahman, S. M. A. (2016). Mathematical modelling and experimental validation of solar drying of mushrooms. International Journal of Green Energy, 13(4), 344-351. doi:10.1080/15435075.2014.952425
     
  100. Rashed, M. M., Kalam, M. A., Masjuki, H. H., Habibullah, M., Imdadul, H. K., Shahin, M. M., & Rahman, M. M. (2016). Improving oxidation stability and NOX reduction of biodiesel blends using aromatic and synthetic antioxidant in a light duty diesel engine. Industrial Crops and Products, 89, 273-284. doi:10.1016/j.indcrop.2016.05.008
     
  101. Rashed, M. M., Kalam, M. A., Masjuki, H. H., Mofijur, M., Rasul, M. G., & Zulkifli, N. W. M. (2016). Performance and emission characteristics of a diesel engine fueled with palm, jatropha, and moringa oil methyl ester. Industrial Crops and Products, 79, 70-76. doi:10.1016/j.indcrop.2015.10.046
     
  102. Rashed, M. M., Masjuki, H. H., Kalam, M. A., Alabdulkarem, A., Imdadul, H. K., Rashedul, H. K., . . . Habibullah, M. (2016). A comprehensive study on the improvement of oxidation stability and NOx emission levels by antioxidant addition to biodiesel blends in a light-duty diesel engine. Rsc Advances, 6(27), 22436-22446. doi:10.1039/c5ra26271b
     
  103. Rashed, M. M., Masjuki, H. H., Kalam, M. A., Alabdulkarem, A., Rahman, M. M., Imdadul, H. K., & Rashedul, H. K. (2016). Study of the oxidation stability and exhaust emission analysis of Moringa olifera biodiesel in a multi-cylinder diesel engine with aromatic amine antioxidants. Renewable Energy, 94, 294-303. doi:10.1016/j.renene.2016.03.043
     
  104. Ruhul, A. M., Kalam, M. A., Masjuki, H. H., Alabdulkarem, A., Atabani, A. E., Fattah, I. M. R., & Abedin, M. J. (2016). Production, characterization, engine performance and emission characteristics of Croton megalocarpus and Ceiba pentandra complementary blends in a single-cylinder diesel engine. Rsc Advances, 6(29), 24584-24595. doi:10.1039/c5ra21750d
     
  105. Ruhul, M. A., Abedin, M. J., Rahman, S. M. A., Masjuki, B. H., Alabdulkarem, A., Kalam, M. A., & Shancita, I. (2016). Impact of fatty acid composition and physicochemical properties of Jatropha and Alexandrian laurel biodiesel blends: An analysis of performance and emission characteristics. Journal of Cleaner Production, 133, 1181-1189. doi:10.1016/j.jclepro.2016.06.017
     
  106. Sabeur, N., Mekhilef, S., & Masaoud, A. (2016). Extended maximum boost control scheme based on single-phase modulator for three-phase Z-source inverter. Iet Power Electronics, 9(4), 669-679. doi:10.1049/iet-pel.2015.0124
     
  107. Sabiha, M. A., Mostafizur, R. M., Saidur, R., & Mekhilef, S. (2016). Experimental investigation on thermo physical properties of single walled carbon nanotube nanofluids. International Journal of Heat and Mass Transfer, 93, 862-871. doi:10.1016/j.ijheatmasstransfer.2015.10.071
     
  108. Safaei, M. R., Ahmadi, G., Goodarzi, M. S., Kamyar, A., & Kazi, S. N. (2016). Boundary Layer Flow and Heat Transfer of FMWCNT/Water Nanofluids over a Flat Plate. Fluids, 1(4). doi:10.3390/fluids1040031
     
  109. Safaei, M. R., Shadloo, M. S., Goodarzi, M. S., Hadjadj, A., Goshayeshi, H. R., Afrand, M., & Kazi, S. N. (2016). A survey on experimental and numerical studies of convection heat transfer of nanofluids inside closed conduits. Advances in Mechanical Engineering, 8(10). doi:10.1177/1687814016673569
     
  110. Safari, A., Niras, C. V., & Kong, Y. N. (2016). Power-performance enhancement of two-dimensional RNS-based DWT image processor using static voltage scaling. Integration-the Vlsi Journal, 53, 145-156. doi:10.1016/j.vlsi.2015.12.006
     
  111. Sanjid, A., Kalam, M. A., Masjuki, H. H., Varman, M., Zulkifli, N., & Abedin, M. J. (2016). Performance and emission of multi-cylinder diesel engine using biodiesel blends obtained from mixed inedible feedstocks. Journal of Cleaner Production, 112, 4114-4122. doi:10.1016/j.jclepro.2015.07.154
     
  112. Sarsam, W. S., Amiri, A., Kazi, S. N., & Badarudin, A. (2016). Stability and thermophysical properties of non-covalently functionalized graphene nanoplatelets nanofluids. Energy Conversion and Management, 116, 101-111. doi:10.1016/j.enconman.2016.02.082
     
  113. Sarsam, W. S., Amiri, A., Zubir, M. N. M., Yarmand, H., Kazi, S. N., & Badarudin, A. (2016). Stability and thermophysical properties of water-based nanofluids containing triethanolamine-treated graphene nanoplatelets with different specific surface areas. Colloids and Surfaces a-Physicochemical and Engineering Aspects, 500, 17-31. doi:10.1016/j.colsurfa.2016.04.016
     
  114. Savari, M., Rashidi, S., Amiri, A., Shanbedi, M., Heris, S. Z., & Kazi, S. N. (2016). Hydrodynamic and thermal performance prediction of functionalized MWNT-based water nanofluids under the laminar flow regime using the adaptive neuro-fuzzy inference system. Numerical Heat Transfer Part a-Applications, 70(1), 103-116. doi:10.1080/10407782.2016.1139974
     
  115. Saw, L. H., Ye, Y. H., Tay, A. A. O., Chong, W. T., Kuan, S. H., & Yew, M. C. (2016). Computational fluid dynamic and thermal analysis of Lithium-ion battery pack with air cooling. Applied Energy, 177, 783-792. doi:10.1016/j.apenergy.2016.05.122
     
  116. Sazzad, B. S., Fazal, M. A., Haseeb, A., & Masjuki, H. H. (2016). Retardation of oxidation and material degradation in biodiesel: a review. Rsc Advances, 6(65), 60244-60263. doi:10.1039/c6ra10016c
     
  117. Sebayang, A. H., Masjuki, H. H., Ong, H. C., Dharma, S., Silitonga, A. S., Mahlia, T. M. I., & Aditiya, H. B. (2016). A perspective on bioethanol production from biomass as alternative fuel for spark ignition engine. Rsc Advances, 6(18), 14964-14992. doi:10.1039/c5ra24983j
     
  118. Sebtahmadi, S. S., Azad, H. B., Islam, D., Seyedmahmoudian, M., Horan, B., & Mekhilef, S. (2016). A Current Control Approach for an Abnormal Grid Supplied Ultra Sparse Z-Source Matrix Converter with a Particle Swarm Optimization Proportional-Integral Induction Motor Drive Controller. Energies, 9(11). doi:10.3390/en9110899
     
  119. Seyedmahmoudian, M., Horan, B., Soon, T. K., Rahmani, R., Oo, A. M. T., Mekhilef, S., & Stojcevski, A. (2016). State of the art artificial intelligence-based MPPT techniques for mitigating partial shading effects on PV systems - A review. Renewable & Sustainable Energy Reviews, 64, 435-455. doi:10.1016/j.rser.2016.06.053
     
  120. Shahizare, B., Ghazali, N. N. B., Chong, W. T., Tabatabaeikia, S. S., & Izadyar, N. (2016). Investigation of the Optimal Omni-Direction-Guide-Vane Design for Vertical Axis Wind Turbines Based on Unsteady Flow CFD Simulation. Energies, 9(3). doi:10.3390/en9030146
     
  121. Shahizare, B., Nik-Ghazali, N., Chong, W. T., Tabatabaeikia, S., Izadyar, N., & Esmaeilzadeh, A. (2016). Novel investigation of the different Omni-direction-guide-vane angles effects on the urban vertical axis wind turbine output power via three-dimensional numerical simulation. Energy Conversion and Management, 117, 206-217. doi:10.1016/j.enconman.2016.03.034
     
  122. Shamshirband, S., Mohammadi, K., Tong, C. W., Petkovic, D., Porcu, E., Mostafaeipour, A., . . . Sedaghat, A. (2016). Application of extreme learning machine for estimation of wind speed distribution. Climate Dynamics, 46(5-6), 1893-1907. doi:10.1007/s00382-015-2682-2
     
  123. Shamshirband, S., Mohammadi, K., Tong, C. W., Petkovic, D., Porcu, E., Mostafaeipour, A., . . . Sedaghat, A. (2016). Application of extreme learning machine for estimation of wind speed distribution (vol 46, pg 1893, 2016). Climate Dynamics, 46(5-6), 2025-2025. doi:10.1007/s00382-015-2730-y
     
  124. Shamshirband, S., Mohammadi, K., Tong, C. W., Zamani, M., Motamedi, S., & Ch, S. (2016). A hybrid SVM-FFA method for prediction of monthly mean global solar radiation. Theoretical and Applied Climatology, 125(1-2), 53-65. doi:10.1007/s00704-015-1482-2
     
  125. Shancita, I., Masjuki, H. H., Kalam, M. A., Reham, S. S., Ruhul, A. M., & Monirul, I. M. (2016). Evaluation of the characteristics of non-oxidative biodiesels: a FAME composition, thermogravimetric and IR analysis. Rsc Advances, 6(10), 8198-8210. doi:10.1039/c5ra23963j
     
  126. Shancita, I., Masjuki, H. H., Kalam, M. A., Reham, S. S., & Shahir, S. A. (2016). Comparative Analysis on Property Improvement Using Fourier Transform Infrared Spectroscopy (FT-IR) and Nuclear Magnetic Resonance (NMR) (H-1 and C-13) Spectra of Various Biodiesel Blended Fuels. Energy & Fuels, 30(6), 4790-4805. doi:10.1021/acs.energyfuels.5b02559
     
  127. Shezan, S. K. A., Julai, S., Kibria, M. A., Ullah, K. R., Saidur, R., Chong, W. T., & Akikur, R. K. (2016). Performance analysis of an off-grid wind-PV (photovoltaic)-diesel-battery hybrid energy system feasible for remote areas. Journal of Cleaner Production, 125, 121-132. doi:10.1016/j.jclepro.2016.03.014
     
  128. Shivashankar, S., Mekhilef, S., Mokhlis, H., & Karimi, M. (2016). Mitigating methods of power fluctuation of photovoltaic (PV) sources - A review. Renewable & Sustainable Energy Reviews, 59, 1170-1184. doi:10.1016/j.rser.2016.01.059
     
  129. Shuhimi, F. F., Bin Abdollah, M. F., Kalam, M. A., Hassan, M., Mustafa, A., & Amiruddin, H. (2016). Tribological characteristics comparison for oil palm fibre/epoxy and kenaf fibre/epoxy composites under dry sliding conditions. Tribology International, 101, 247-254. doi:10.1016/j.triboint.2016.04.020
     
  130. Silitonga, A. S., Masjuki, H. H., Ong, H. C., Kusumo, F., Mahlia, T. M. I., & Bahar, A. H. (2016). Pilot-scale production and the physicochemical properties of palm and Calophyllum inophyllum biodiesels and their blends. Journal of Cleaner Production, 126, 654-666. doi:10.1016/j.jclepro.2016.03.057
     
  131. Silitonga, A. S., Masjuki, H. H., Ong, H. C., Yusaf, T., Kusumo, F., & Mahlia, T. M. I. (2016). Synthesis and optimization of Hevea brasiliensis and Ricinus communis as feedstock for biodiesel production: A comparative study. Industrial Crops and Products, 85, 274-286. doi:10.1016/j.indcrop.2016.03.017
     
  132. Solangi, K. H., Amiri, A., Luhur, M. R., Ghavimi, S. A. A., Kazi, S. N., Badarudin, A., & Zubir, M. N. M. (2016). Experimental investigation of heat transfer performance and frictional loss of functionalized GNP-based water coolant in a closed conduit flow. Rsc Advances, 6(6), 4552-4563. doi:10.1039/c5ra23998b
     
  133. Solangi, K. H., Amiri, A., Luhur, M. R., Ghavimi, S. A. A., Zubir, M. N. M., Kazi, S. N., & Badarudin, A. (2016). Experimental investigation of the propylene glycol-treated graphene nanoplatelets for the enhancement of closed conduit turbulent convective heat transfer. International Communications in Heat and Mass Transfer, 73, 43-53. doi:10.1016/j.icheatmasstransfer.2016.02.003
     
  134. Suganya, T., Varman, M., Masjuki, H. H., & Renganathan, S. (2016). Macroalgae and microalgae as a potential source for commercial applications along with biofuels production: A biorefinery approach. Renewable & Sustainable Energy Reviews, 55, 909-941. doi:10.1016/j.rser.2015.11.026
     
  135. Tabatabaeikia, S., Bin Nik-Ghazali, N. N., Chong, W. T., Shahizare, B., Fazlizan, A., Esmaeilzadeh, A., & Izadyar, N. (2016). A Comparative Computational Fluid Dynamics Study on an Innovative Exhaust Air Energy Recovery Wind Turbine Generator. Energies, 9(5). doi:10.3390/en9050346
     
  136. Tabatabaeikia, S., Ghazali, N. N. B., Chong, W. T., Shahizare, B., Izadyar, N., Esmaeilzadeh, A., & Fazlizan, A. (2016). Computational and experimental optimization of the exhaust air energy recovery wind turbine generator. Energy Conversion and Management, 126, 862-874. doi:10.1016/j.enconman.2016.08.039
     
  137. Tareen, W. U., & Mekhilef, S. (2016). Transformer-less 3P3W SAPF (three-phase three-wire shunt active power filter) with line-interactive UPS (uninterruptible power supply) and battery energy storage stage. Energy, 109, 525-536. doi:10.1016/j.energy.2016.05.005
     
  138. Teng, K. H., Amiri, A., Kazi, S. N., Bakar, M. A., & Chew, B. T. (2016). Fouling mitigation on heat exchanger surfaces by EDTA-treated MWCNT-based water nanofluids. Journal of the Taiwan Institute of Chemical Engineers, 60, 445-452. doi:10.1016/j.jtice.2015.11.006
     
  139. Teng, K. H., Baharudin, R. H., Bakar, M. A., & Kazi, S. N. (2016). Mitigation of heat exchanger fouling in industry using catalytic materials. Desalination and Water Treatment, 57(1), 22-27. doi:10.1080/19443994.2015.1012334
     
  140. Tey, K. S., & Mekhilef, S. (2016). A reduced leakage current transformerless photovoltaic inverter. Renewable Energy, 86, 1103-1112. doi:10.1016/j.renene.2015.09.039
     
  141. Togun, H., Abdulrazzaq, T., Kazi, S. N., & Badarudin, A. (2016). AUGMENTED OF TURBULENT HEAT TRANSFER IN AN ANNULAR PIPE WITH ABRUPT EXPANSION. Thermal Science, 20(5), 1621-1632. doi:10.2298/tsci140816138t
     
  142. Togun, H., Abu-Mulaweh, H. I., Kazi, S. N., & Badarudin, A. (2016). Numerical simulation of heat transfer and separation Al2O3/nanofluid flow in concentric annular pipe. International Communications in Heat and Mass Transfer, 71, 108-117. doi:10.1016/j.icheatmasstransfer.2015.12.014
     
  143. Tong, C. W., Hang, W. X., Hoe, W. K., Mojumder, J. C., Chew, P. S., Huat, S. L., & Hin, L. S. (2016). Performance assessment of a hybrid solar-wind-rain eco-roof system for buildings. Energy and Buildings, 127, 1028-1042. doi:10.1016/j.enbuild.2016.06.065
     
  144. Wakil, M. A., Kalam, M. A., Masjuki, H. H., & Fattah, I. M. R. (2016). Rice bran: A prospective resource for biodiesel production in Bangladesh. International Journal of Green Energy, 13(5), 497-504. doi:10.1080/15435075.2014.966374
     
  145. Yarmand, H., Gharehkhani, S., Shirazi, S. F. S., Amiri, A., Alehashem, M. S., Dahari, M., & Kazi, S. N. (2016). Experimental investigation of thermo-physical properties, convective heat transfer and pressure drop of functionalized graphene nanoplatelets aqueous nanofluid in a square heated pipe. Energy Conversion and Management, 114, 38-49. doi:10.1016/j.enconman.2016.02.008
     
  146. Yarmand, H., Gharehkhani, S., Shirazi, S. F. S., Amiri, A., Montazer, E., Arzani, H. K., . . . Kazi, S. N. (2016). Nanofluid based on activated hybrid of biomass carbon/graphene oxide: Synthesis, thermo-physical and electrical properties. International Communications in Heat and Mass Transfer, 72, 10-15. doi:10.1016/j.icheatmasstransfer.2016.01.004
     
  147. Yarmand, H., Gharehkhani, S., Shirazi, S. F. S., Goodarzi, M., Amiri, A., Sarsam, W. S., . . . Kazi, S. N. (2016). Study of synthesis, stability and thermo-physical properties of graphene nanoplatelet/platinum hybrid nanofluid. International Communications in Heat and Mass Transfer, 77, 15-21. doi:10.1016/j.icheatmasstransfer.2016.07.010
     
  148. Yau, Y. H., & Chang, C. P. (2016). The fieldwork and control engineering studies on thermal comfort of occupants in a conventional office building in the tropics. Building Services Engineering Research & Technology, 37(3), 355-373. doi:10.1177/0143624415611580
     
  149. Yau, Y. H., & Lian, Y. C. (2016). A computational fluid dynamics study of the effects of buoyancy on air flow surrounding a building. Building Services Engineering Research & Technology, 37(3), 257-271. doi:10.1177/0143624415597399
     
  150. Yau, Y. H., & Lim, K. S. (2016). Energy analysis of green office buildings in the tropics-Photovoltaic system. Energy and Buildings, 126, 177-193. doi:10.1016/j.enbuild.2016.05.010
     
  151. Zafar, Q., Azmer, M. I., Al-Sehemi, A. G., Al-Assiri, M. S., Kalam, A., & Sulaiman, K. (2016). Evaluation of humidity sensing properties of TMBHPET thin film embedded with spinel cobalt ferrite nanoparticles. Journal of Nanoparticle Research, 18(7). doi:10.1007/s11051-016-3488-9
     
  152. Zahid, R., Masjuki, H. H., Varman, M., Abul Kalam, M., Mufti, R. A., Zulkifli, N., . . . Azman, S. (2016). Influence of intrinsic and extrinsic conditions on the tribological characteristics of diamond-like carbon coatings: A review. Journal of Materials Research, 31(13), 1814-1836. doi:10.1557/jmr.2016.31
     
  153. Zaihidee, F. M., Mekhilef, S., Seyedmahmoudian, M., & Horan, B. (2016). Dust as an unalterable deteriorative factor affecting PV panel's efficiency: Why and how. Renewable & Sustainable Energy Reviews, 65, 1267-1278. doi:10.1016/j.rser.2016.06.068
     
  154. Zargham, S., Ward, T. A., Ramli, R., & Badruddin, I. A. (2016). Topology optimization: a review for structural designs under vibration problems. Structural and Multidisciplinary Optimization, 53(6), 1157-1177. doi:10.1007/s00158-015-1370-5
     
  155. Zubir, M. N. M., Badarudin, A., Kazi, S. N., Ming, H. N., Sadri, R., & Amiri, A. (2016). Investigation on the Use of Graphene Oxide as Novel Surfactant for Stabilizing Carbon Based Materials. Journal of Dispersion Science and Technology, 37(10), 1395-1407. doi:10.1080/01932691.2015.1108850
     
  156. Zubir, M. N. M., Badarudin, A., Kazi, S. N., Misran, M., Ibrahim, R., Amiri, A., & Sadri, R. (2016). Exploration of the environmentally benign and highly effective approach for improving carbon nanotube homogeneity in aqueous system. Journal of Thermal Analysis and Calorimetry, 124(2), 815-825. doi:10.1007/s10973-015-5135-6
     
  157. Zubir, M. N. M., Muhamad, M. R., Amiri, A., Badarudin, A., Kazi, S. N., Oon, C. S., . . . Yarmand, H. (2016). Heat transfer performance of closed conduit turbulent flow: Constant mean velocity and temperature do matter! Journal of the Taiwan Institute of Chemical Engineers, 64, 285-298. doi:10.1016/j.jtice.2016.04.013

Proceedings

  1. Aamir, M., Mekhilef, S., & Ieee. (2016). New Single Stage AC/DC Converter with High Frequency Link Isolation for High Power Application.
     
  2. Ahmed, N. J. S., Al-Rashed, A., Khan, T. M. Y., SarfarazKamangar, AbdulgaphurAthani, & Badruddin, I. A. (2016). Heat transfer analysis in an annular cone subjected to power law variations. In C. S. P. Rao & S. Basavarajappa (Eds.), International Conference on Advances in Materials and Manufacturing Applications (Vol. 149).
     
  3. Azeem, Khan, T. M. Y., Badruddin, I. A., Nik-Ghazali, N., & Idris, M. Y. I. (2016). Influence of Radiation on Double Conjugate Diffusion in a Porous Cavity. In M. S. Shekhawat, S. Bhardwaj, & B. Suthar (Eds.), International Conference on Condensed Matter and Applied Physics (Vol. 1728).
     
  4. Badruddin, I. A., Khan, T. M. Y., Ahmed, N. J. S., & Kamangar, S. (2016). Effect of variable heating on double diffusive flow in a square porous cavity. In M. S. Shekhawat, S. Bhardwaj, & B. Suthar (Eds.), International Conference on Condensed Matter and Applied Physics (Vol. 1728).
     
  5. Badruddin, I. A., & Quadir, G. A. (2016). Heat and Mass Transfer in Porous Cavity: Assisting Flow. In T. Simos & C. Tsitouras (Eds.), Proceedings of the International Conference on Numerical Analysis and Applied Mathematics 2015 (Vol. 1738).
     
  6. Badruddin, I. A., & Quadir, G. A. (2016). Heat Transfer in Porous Medium Embedded with Vertical Plate: Non-Equilibrium Approach- Part A. In T. Simos & C. Tsitouras (Eds.), Proceedings of the International Conference on Numerical Analysis and Applied Mathematics 2015 (Vol. 1738).
     
  7. Badruddin, I. A., & Quadir, G. A. (2016). Radiation and Viscous Dissipation Effect on Square Porous Annulus. In T. Simos & C. Tsitouras (Eds.), Proceedings of the International Conference on Numerical Analysis and Applied Mathematics 2015 (Vol. 1738).
     
  8. Basri, H. M., Mekhilef, S., & Ieee. (2016). Model Predictive Torque and Flux Control of Induction Motor Fed by Three Level Indirect Matrix Converter with Unity Power Factor Strategy.
     
  9. Chong, W. T., Muzammil, W. K., Gwani, M., Wong, K. H., Fazlizan, A., Wang, C. T., & Poh, S. C. (2016). The Development and Testing of a Novel Cross Axis Wind Turbine. In Indarto, S. Kamal, H. Saptoadi, Deendarlianto, J. Sentanuhady, A. Widyaparaga, I. Pranoto, K. Ishihara, H. Ohgaki, Y. Takata, J. Tanimoto, T. Biwa, Z. Alauddin, I. Reksowardojo, & C. Nuthong (Eds.), Proceedings of the 3rd Aun/Seed-Net Regional Conference on Energy Engineering and the 7th International Conference on Thermofluids (Vol. 1737).
     
  10. Dey, P., Datta, M., Fernando, N., & Ieee. (2016). Comparisons of PI and PR Current Controllers based Flux Weakening to Limit DC-link Capacitor Overvoltage in PMSG based Wind Energy System.
     
  11. Dey, P., Datta, M., Fernando, N., Senjyu, T., & Ieee. (2016). Comparison of Synchronous and Stationary Frame PI based Flux Weakening Controls for DC-link Overvoltage Minimisation of WECS under Grid Fault.
     
  12. Dey, P., Datta, M., Fernando, N., Senjyu, T., & Ieee. (2016). A Method to Reduce DC-link Overvoltage of PMSG Based WECS during LVRT.
     
  13. Hasan, R., Mekhilef, S., Nakaoka, M., Nishida, K., & Ieee. (2016). Soft-Switching Active-Clamp Flyback Microinverter for PV Applications.
     
  14. Hirota, A., Mekhilef, S., Nakaoka, M., & Ieee. (2016). A Lower Switching Noise Two-Legs Three-Phase Inverter Applying New Type Modulation Scheme.
     
  15. Kaneko, K., Omori, H., Kimura, N., Morizane, T., Mekhilef, S., Nakaoka, M., & Ieee. (2016). Design of Super-Rapid Charging Capacitor Scooter with EDLC Power Supply and Pulse Power Charger.
     
  16. Khan, T. M. Y., Badruddin, I. A., & Quadir, G. A. (2016). Heat transfer in a conical porous cylinder with partial heating. In C. S. P. Rao & S. Basavarajappa (Eds.), International Conference on Advances in Materials and Manufacturing Applications (Vol. 149).
     
  17. Montazer, E., Mirzaei, M., Salami, E., Ward, T. A., Romli, F. I., Kazi, S. N., & Iop. (2016). Optimization of a synthetic jet actuator for flow control around an airfoil. In Aerotech Vi - Innovation in Aerospace Engineering and Technology (Vol. 152).
     
  18. Parvez, M., Mekhilef, S., Tan, N. M. L., Akagi, H., & Ieee. (2016). A Robust Modified Model Predictive Control (MMPC) Based on Lyapunov Function for Three-Phase Active-Front-End (AFE) Rectifier. In Apec 2016 31st Annual Ieee Applied Power Electronics Conference and Exposition (pp. 1163-1168).
     
  19. Quadir, G. A., & Badruddin, I. A. (2016). Heat Transfer in Porous Medium Embedded with Vertical Plate: Non-Equilibrium Approach- Part B. In T. Simos & C. Tsitouras (Eds.), Proceedings of the International Conference on Numerical Analysis and Applied Mathematics 2015 (Vol. 1738).
     
  20. Sabeur, N., Mekhilef, S., Nakaoka, M., Masaoud, A., & Ieee. (2016). A Simple Modulation Based Maximum Boost Control Strategy for Three-Phase Quasi Z-Source Inverter.
     
  21. Shuhimi, F. F., Abdollah, M. F. B., Kalam, M. A., Masjuki, H. H., Mustafa, A., & Amiruddin, H. (2016). Surface durability of oil palm fiber/epoxy composite at various temperatures.
     
  22. Zulkifli, N. W. M., Azman, S. S. N., Kalam, M. A., Masjuki, H. H., Yunus, R., & Gulzar, M. (2016). Lubricity of bio-based lubricant derived from different chemically modified fatty acid methyl ester. Tribology International, 93, 555-562. doi:10.1016/j.triboint.2015.03.024

Last Update: 16/06/2022